Thank you!

We have received your message and will get back to you shortly.

charter consultation sended

Unfortunately, this boat is not available for sale. It will be removed from the website soon.

PRINCESS YACHTS - available for sale:

Yachts with similar parameters:

Find a yacht

SOLARIS - PRINCESS YACHTS

SOLARIS 131' 10" PRINCESS YACHTS 2014 PRICE ON APPLICATION

Specifications

Accomodations:
6 staterooms
Length:
131' 10" (40.16 m)
Year Built:
2014
Builder:
PRINCESS YACHTS
Category:
Mega Yacht
Location:
France - SouthMonaco
Buy a yacht buy another yacht from our catalog
  • All Specifications
  • Overview

Basic Information

Builder:
PRINCESS YACHTS
Category:
Mega Yacht
Model Year:
2014
Year Built:
2014
Country:
Monaco
Fly Bridge:
Yes

Dimensions

LOA:
131' 10" (40.16m)

Speed, Capacities and Weight

Accommodations

Hull and Deck Information

Hull Material:
Fiberglass

Engine Information

Manufacturer:
MTU
Model:
Twin MTU 12V 4000 M73 (2 x 2938 hp)
Fuel Type:
Diesel

Overview

Stabilisers: Hydraulic Fin, Zero Stabilised

Galley worktop: Granite;

Bathroom worktops: Marble 

Under floor heating in all bathrooms

Flybridge GRP hardtop with electrically operated opening center section in soft fabric

Teak laid all exterior decks

Two sliding doors in saloon on the main deck with access to the balcony with hydraulic driver

Hydraulic system consisting of separate engine driven hydraulic pumps on each engine with cross connections allowing any system to be supplied with hydraulic power from either engine

TRAC hydraulic system including fitting of bow and stern thrusters and hydraulic winches 

Underwater transom lights switched independently

Two 80 kW ONAN generators with hydroflash exhaust system

SPA basin fitted on flybridge

Multifunctional navigation system and yacht monitoring system Böning controlled all Yacht systems

Additional Yacht control stations fitted on the wings of the yacht

All cabins are equipped by TVs with multimedia systems

Fully equipped galley

Fully equipped laundry

Security and entering control systems

Garage on transom for tender and two Jets

Electrical Continental 220v/240v sockets

Bow and stern thrusters

Fuel filtering and fuel conditioning systems

Fit TRAC STAR 'FIN' type digital stabiliser system & stern thruster

Fit satellite Phone KVH TracPhone V7 (in HD11 dome)

Fit satellite TV system KVH TracVision HD11

Sat TV receivers fitted at the rack under helm station and linked to each TV Set

Fit AIS system Furuno FA150 Class A 

Optional layout with six cabins where two VIP cabins are fitted

Optional layout with one bathroom in place standard two separated in main deck Master cabin

Oceanus-E3Y Dive Compressor in the garage area (330 Bar)

ASEA AC90-3/3 Shore power Converter (two AC45-3 units in parallel) with two shore power cords, one (primary q125 Amp) would feed the Master unit and the slave unit (via changeover switch). The secondary cord would only feed the slave unit via changeover switch.

Increase in size of Main Deck Saloon TV from 55” to 65”

Owner’s deck exterior furniture according to the MB option #3 (Formal) including covers, Objects and accessories according to Mark Berryman presentation, Artwork approved by the Owner to MB to the Yacht according to the presentation 

To supply diving bottles and accessories and fit rack for the all on bulkhead in the garage. 6 dive bottles to be stowed on bulkhead in stowage rack.

Remove aft feature glass & console table

Changes to design and manufacture of ceiling panels

Changes to layout of floor

Additional labor required during construction to set up new bulkhead arrangement, manufacture new furniture and modify ceiling panels (in lieu of standard)

Upper Deck Stateroom Office Bathroom:

Owner’s office area with desk and storage

Bathroom area with the following features:

Large shower cubicle

Spa tub

Sink on feature unit

Private toilet room accessed via sliding door with toilet and bidet

Work Involved:

Office area furniture

Bathroom layout

Changes to bulkheads and their position

Changes to design and manufacture of ceiling panels

Changes to layout of floor 

Significant additional use of stone in bathroom compared to standard layout 

Upper Deck General Changes:

Changes to looms 

Changes to fire system

Changes to safety plan

Structural changes to bulkheads

the interior designer service (Mark Berriman design bureau)

additional Interior Lighting

Bespoke Color Scheme 

leather inserts of Buffalo R67 in front panels of a case in an office the Master cabin on the main deck

cancel of installation of a standard TV cabinet with the lifting mechanism in salon

Aft part of salon Modification. Modification of columns for installation of the built-in columns of the central channel and two stereos of columns on each side. Manufacturing and mechanism installation for TV fixture with a diagonal 65" in the central part of the decorative panel between columns
Re-locate air handlers aft with revised columns on outboard sides (in lieu of standard)

UPPER DECK:

Wheelhouse:

- Revised cranked aft bulkhead to maximize space in master bathroom and captain’s cabin, but to maintain visibility within Wheelhouse

Central perch required, two co-pilot seats not required

New aft bulkhead arrangement, now in 8 sections

Changes to design and manufacture of ceiling panels

Changes to layout of floor

To set up new bulkhead arrangement, modify ceiling panels and revised flooring templates (in lieu of standard)

Captain’s Cabin:

Revised location to port side, incorporating desk, small bathroom and single Captains berth

Escape hatch not required by flag to lobby

New cabin arrangement:

Furniture, including desk and basin unit

Ceiling panel arrangement

Re-routing of services including plumbing and electrical

Upper Deck Lobby:

Staircase in same location, but smaller Lobby area to maximize Upper Deck Stateroom space

Revised bulkhead arrangement

Revised ceiling panel arrangement (in lieu of standard)

Layout Changings at the Upper (Bridge) Deck Stateroom:

Entrance area with bank of wardrobes on starboard side (mirror fronted)

Berth offset to port side (berth to be 2.2m long)

Two bedside tables each with lamp

TV on drop-down mechanism from ceiling at base of berth

Seating area on port side of stateroom with two lamp table, sofa, armchair and coffee table

New cabin arrangement including:

Berth and bedside tables

Outboard furniture

Changes to bulkheads and their position


Books to the Yacht according to the MB Orders 

Additional two paintings to saloon according to MB choice

Bath Pillows – grey according to MB choice

Plants according to MB choice 

Screwfix according to MB choice

Round Rattan Log Baskets – Small according to MB choice 

Summit teak furniture according to MB choice 

Spring loaded coat hooks, chrome according to MB choice 

equipment is approved for installation in Gym:

1 X Technogym Kinesis Vision 
1 x Technogym Run Personal 
1 x Technogym Wellness Rack 

INTERIOUR FURNITURE and LAYOUT CHANGES

CANCEL Dumb Waiter

THE LAYOUT CHANGES WITH BREAKDOWN LISTED BELOW:

MAIN DECK & SKY DECK WETBAR STONE

Main Deck & Sky Deck Wetbar Raised section Caesarstone choice is 7141 Quartz Reflection  - lower part of bar is standard white Avonite

Forward VIP Stateroom:

To become Gym with Shower Room instead of Stateroom

Removal of berth, bedside tables, dressing table and chair, and wardrobes

Standard TV position to remain

Re-located bulkhead (moving further outboard) between main Gym area and head/shower

Entrance to day head with single sink and toilet.  Large shower cubicle with steam shower

Layout changes in lieu of standard

Port Aft Double Stateroom:

Twin aft Stateroom layout in lieu of standard

Starboard Aft Double Stateroom:

Twin aft Stateroom layout in lieu of standard

Main Deck Saloon & Dining:

Based on standard layout with the following revisions:

Remove central columns


Installation of an additional 4th sunbed of Barlow Tyrie Sun Lounger on a main deck

Pre Lube option 

installation a pop up 46” Samsung TV mounted on the stbd aft side cabinet (this cost including development and production of the cabinet, interior modification, lift mechanism and TV set)

To supply teak insert between two tables in main deck cockpit

Custom made fender protection fitted to the edge of transom and bathing platform

Custom made beach platform and transom inflatable fendering to be manufactured by Henshaw Inflatable’s Ltd. (This will be very similar to the Fendering supplied for 40M011.) 

Due to there being no beach door and transom rails (as specified on 40M011) the fendering will require sockets to be installed into the beach door and transom to allow the Fendering to be fastened.

Fendering to be manufactured in a dark blue

To supply and fit main deck cockpit cover with zipped pockets 

Cover fitted on 40M011 consisted of a large retractable stainless steel structure fitted in the main deck canopy; this is not possible on 40M012 due to the current stage of build.

Fabric colour exterior covers in Weathermax Silver from Weathermax collections

To supply and fit Samsung 46” TV Set in crew mess area in place of standard 32” TV Set

To supply protection covers to all internal furniture and carpets (Fabric colour covers in Weathermax Silver from Weathermax collections)

Heavy cotton twill covers to be manufactured in a cream colour (agreed with Mark Berryman)

The covers would comprise of all tables, all loose chairs, all sofas, carpets and main walkways through areas of timber flooring. 

To supply protection covers to all external furniture (Fabric colour exterior covers in Weathermax Silver from Weathermax collections)

As an additional sun lounger has been specified on 40M012 this will need an additional cover.

To supply protection covers with ventilation pockets to Sundeck (Fabric colour exterior covers in Weathermax Silver from Weathermax collections)

To supply tender Williams Dieseljet 625 Sport 260HP according to the Williams Performance Tender Limited Quotation #700204 dd 08.10.2013

CUSHIONS AND THROWS according to the quotation

Garage lift, celling panels and chocks modification to fit two SeaDoo 

To supply and fit Yacht name “SOLARIS” made in stainless steel with lightening according to design of the Principal choice 

Additional china 

Go to search history
image description