• Ablative/Copolymer anti-fouling bottom paint (2 coats), using "interlux Interprotected expoxy primer system"
• Awlgrip brass thru hulls and sea strainers in engine room and forward bilge
• Awlgrip engine room, lazarette, forward bilge and anchor locker for enhanced visibility and easier maintenance
• Blister resistant modified vinylester resin in entire hull skin
• Custom blended polyester resin used in structural laminates, topsides, bridges, and hardtops
• Dockside and overboard pump outs for holding tank
• Dupont high gloss polyurethane boot stripe
• Four (4) stateroom layout, three (3) heads
• Hatches, one (1) Bomar, fore-deck hatch with Ocean Air screen shade system
• High-gloss, teak interior finish throughout
• High performance isophthalic npg gelcoat for superior gloss, flexibility and oustanding weathering characteristics
• Hull interior bilge areas isophthalic gelcoat top-coated with a durable high gloss polyurethane coating
• Hull infused using Baltek End Grain Balsa and Airex Foam cores with Aramid and E-glass hybrid fiberglass laminates
• Infused fiberglass intermediate engine room bulkhead, fuel, freshwater and holding tanks with fiberglass baffles inside and balsa coring on sides for stiffness, sealed to hull with syntatic foam
• Molded fiberglass salon floor/engine room ceiling with foam core for acoustical and thermal insulation
• Propeller pockets to reduce draft
• Stringers, fiberglass encapsulated foam
• Vacuum bagged composite bulkheads - Main engine room bulkhead, and forward bulkhead
• Salon Forward window mask UPGRADE
• Construction included deleting the bow pulpit, with bow cleats fore and aft UPGRADE
• Additional Fuel Tank forward UPGRADE

• Air conditioning - direct expansion, zoned with reverse cycle heat for complete climate control throughout the interior and with individual controls for staterooms and salon
• Bilge pumps with Cleanout pumps linked into monitoring system and connected to float switches for automatic and manual operation
• Centralized seawater system
• DC power assist hydraulic steering independent of engines
• "Delta T" engine room ventilatoin system with thermostatically controlled supply and discharge fans for proper fresh air circulation and water intrusion suppression
• "Delta T" pneumatically controlled engine room ventilation dampers, integrated into fire suppression system
• Dual stage speed 110V AC fresh water system with on deck fresh water fill and cockpit dockside supply inlet with pressure reducing valve
• External sea strainers for main engine pick-ups
• Fiberglass side discharge thru-hulls
• Fire suppression system, automatically and manually operated and tied into main engine and generator ignition and ventilation systems with override
• Fresh water filter - paper
• Fresh water supply in engine room for general maintenance and cleaning
• Fuel priming pumps for main engines, electric
• Fuel transfer and management system, 24 VDC pump controlled through Octoplex, touch-screen control panels
• Hour meters on generators
• Internal sea strainers for generator, and all other sea water pickups
• Mufflers - engines, in-line type with surge tubes in engine room
• Mufflers - generators, gas/water separators
• Oil changing system gear type pump for main engines, transmissions, and generator with pump out line run to cockpit locker
• PEX plumbing, fresh water system with manifold system to isolate individual areas
• Propellers, Class "S" pitch tolerance (ISO 484/2) and dynamic balancing.  Advanced design cambered blade sections for optimum performance.  Interceptors strips to adjust engine load.  Nibral alloy for maximum durability
• Racor fuel/water separator filters for main engines and single for generator.  Clear bowl type, top-loading for convenient replacing
• Rudders, stainless, composite rudder bearing with dripless seal laminated into hull
• Seacocks, bronze, ball-type sea valves for all thru-hulls below the water line - Awlgrip snow white
• Shafts - 2 Aquamet high-strength stainless steel, double-taper with machined keyway and custom thrust plate at main engine couplings
• Struts - thru-water, Nibral, composite bearings
• Tides Marine water lubricated dripless shaft seals with crossover water supply from both engines
• Trim tabs, recessed in transom with fiberglass covers, individual controls for each tab and indicator displays located at helm
• Water heater - 20 gallons, electric
• DC Bow Thruster with control button in single lever handle UPGRADE

• 24V DC ship's service throughout
• 240/120V AC power supply
• 110V outlet in engine room on aft bulkhead
• Anchor light/navigation lights
• Batteries, (2) independent 24V banks mounted in fiberglass storage boxes, maintenance free
• Battery chargers, (2) with thermal cutoff and switching system for complete integration
• Battery distribution panels with battery cutoff for ship service batteries and engine batteries
• Battery parallel system for main engines and generator start
• Bonded electrical system with ground plate
• Color-coded, labeled and numbered wiring system with corresponding drawings
• Dockside electrical inlet for 50/220 VAC with Voltage Isolation transformer for consistent, clean voltage
• Dimmers, DC LED interior lighting throughout excluding companionway
• Engine room lights, recessed AC and DC with switch at engine room entrance
• Generator, Diesel - (1) 23.5 KW Onan QD (electronic quiet diesel) Series, user-friendly with electronic goerning allowing voltage and electronic frequency control
• Glendinning cablemaster (2) 50/220 VAC with 3 wire grounded cord with Charles Iso-boost transformer
• Instrument panel lights for flybridge and main electric panel
• Lighting, overhead LED lights recessed in ceiling and rope style decor lights concealed by teak valances
• Magnetic switches for bilge lights
• Master electrical control provided via Octoplex Power Distribution System utilizing a redundant Can Bus control for AC/DC remote breaker electrical systems.  Complete system control and monitoring provided by 2 integrated touch screen controls - (1) located at salon main panel and (1) at the flybridge helm
• Receptacles, 120V duplex with GFI throughout

• Back-up engine controls supplied by engine manufacturer
• Bridge installed without exposed fasteners and toe kick
• Center console walk-around helm with electronic storage in raised pod and additional storage below
• Custom helm pod with single lever electronic controls and stainless steel steering wheel and trim tab control switches
• Depthfinder/Sea temperature gauge - Furuno RD-33
• Electronic trolling valve controls
• Engine shutdown switches at cabinet in console
• Extended overhang for extra room to move behind helm and companion seats with anodized aluminum aft railing
• Fire system control with automatic and manual discharge and override system located at console
• Fresh water outlet forward locker
• Freezer, top-loading, for bait and food storage, forward
• Gauges/electronic displays, include hour meter reading for main engines, supplied by manufacturer
• Handrails, powder-coated aluminum effectively positioned above ladder to bridge and at helm
• Instrumentation based on standard engine package, lighted with switches in radio box
• Lighted Ritchie compass, large and flush-mounted on centerline
• Lounge seating to port and starboard and at forward end of helm console with vinyl covered foam cushions, hinged for access to storage under seats
• Octoplex touch screen control monitor with audible and visible alarms:  fire, engine room temperature, high bilge water, high exhaust temperature generator and tank monitors as well as confirming correct system operation
• Non-skid deck for traction and durability
• Port and starboard cabinet at aft end of lounge seating
• Recessed electronics box in console for custom electronics package that is easily viewable and protected from the elements by acrylic fitted lid with gasket and stainless steel gas pistons
• Recessed radio boxes, large radio boxes on port and starboard sides of console with switch panel inside
• Refrigerated drink box located at starboard forward corner
• Removable flybridge bench seat backrest forward facing at aft ends of port and starboard bench seats
• Sink with spray head at forward end of flybridge
• Stereo speakers, tied into stereo system in salon, and flush-mounted to aft ends of bridge with remote control
• Trim tab control switch mounted at console
• Trumpet style air horns, (2)
• Under helm access with lights and storage room
• VHF radio with antenna and mounts - ICOM IC-M604

• Aluminum backing plate, laminated in cockpit sole
• Boarding box, fiberglass with non-slip, lift up top and storage
• Cable TV and telephone connections in cabinet under port forward gunwale wired to a home runs in entertainment center

                  - RG6 TV cable to accommodate satellite system

                 - Phone cable is two-pair to accommodate current data phone systems

• Dockside electric connection - (2) 50 amp /220V electric retractable
• Dockside water connection with pressure reducing valve in cabinet under gunwale
• Engine room access with door and ladder to engine room
• Extended flybridge overhang for shade
• Fresh water wash down with hose bib located in cabinet under gunwale
• Gaskets for all lids and access doors
• Glendinning Cablemasters (2) in forward port and starboard cabinets under gunwales
• Grabrails at cockpit haunch
• Indirect rope lighting underneath the coaming (LED) TRI COLOR RED WHITE AND BLUE UPGRADE
• Ladder to flybridge, one-piece, anodized aluminum with non-skid treads
• Latches for all in deck box lids to prevent water intrusion into deck boxes
• Lazarette hatch with access to steering system, trim tabs, drain pumps
• Lighting, recessed LED deck lights in flybridge overhang, TRI COLOR RED WHITE AND BLUE UPGRADE
• Molded non-skid deck
• Observation mezzanine with port aft facing lounge seating with Sunbrella covered cushions hinged seat with bait freezer, tackle cabinet to starboard with pullout drawers, Sumbrella UPGRADE
• Recessed oversized in-deck fishbox, live well tub and dunnage box insulated, removable with pump out and drain plate with large holes for drainage
• Recessed oversized refrigerated chill box in mezzanine step for direct access from cockpit
• Rod holders, (4) RELEASE MARINE boltless UPGRADE
• Rounded bottom-edge cockpit coaming for comfort
• Sea water wash-down supplied from centralized sea water system
• Self bailing cockpit with large scuppers
• Side lockers under coaming with gaff storage
• Split lids for fishboxes
• Stainless steel gas springs on all hatches and lids
• Stereo speakers tied into salon stereo with remote control
• Straps with padding to secure transom door and gate while open
• Transom mounted fishbox with drain
• Transom mounted swim steps at transom door
• Valve to fill freshwater tank from dockside inlet
• Walk-through transom door with lift gate
• Y-valve fresh and salt water wash down
• Plumb transom box as livewell without windows and lights UPGRADE
• Refrigerate pot mezzanine undermounted step box UPGRADE
• Ice maker with discharge to starboard mezzanine box UPGRADE
• Seawater supply and fitting for an optional on-deck liverwell, (2) fittings, one on each side UPGRADE
• Transom - solid coaming with transom box, no window UPGRADE
• Cockpit freezer bait trays UPGRADE
• Run wires to fighting chair deckplate for lights UPGRADE
• Run wires to cockpit for future installation of outlets UPGRADE
• Polished threshold, salon door track bright anodized UPGRADE

• Air conditioning with reverse cycle heat that circulates from concealed registers behind the valances to maximize comfort while minimizing noise and drafts - individual temperature control
• Blinds for desired natural lighting and additional privacy
• Carpeting, wall-to-wall with lined padding for sound absorption, UPGRADE
• Cockpit table, teak, high-gloss finish, hi/low
• Custom Amtico flooring at salon entrance
• Decorative throw pillows for sofa
• Fixed, frameless side windows with tinted, tempered glass for style, natural lighting, and privacy
• Home theater center with 46" LED TV on a raise and lower mechanism with antenna or cable hook-up, and Bose Lifestyle system with surround sound, aux audio input jacks to accommodate additional equipment
• Ice maker - clear ice located in entertainment center
• Lambrequins, fabric upholstered-inlaid in teak frames
• Lighting, overhead LED lights recessed in headliner with dimmer switches and indirect decorative rope lighting behind valances, 24 VDC
• UPGRADE L-shaped lounge with lift cushions for storage, Dewberry in Ultraleather Brica Fresco
• Main electrical panel with AC selector breakers and Octoplex touch screens control monitor with audible and visible alarms:  fire, engine room temperature, high bilge water, high exhaust temperature, generator and tank monitors as well as confirming correct system operation
• Custom headliner, Moccasin Chamois UPGRADE
• Sliding electric salon door, molded fiberglass door with window and teak interior finish with key lock
• High Gloss Teak cabinetry with drawers and bottle storage, finished maple interior
• Teak trim where Amtico floor meets carpet
• Teak strips between headliner panels
• Valances solid teak, fluted with solid teak blind covers
• Costa carpet runner, full canvas UPGRADE
• Canvas companionway carpet runner for steps UPGRADE
• Decor accessory Kit UPGRADE
• Crown molding in salon UPGRADE

• Custom Amtico flooring, Arow, vintage teak Arod Herringbone
• Custom galley island, 360 degree access, storage and granite countertop with overhang for 2 bar stools, (Maclaren) Ladolce Vita w/ 1/4" bevel, polished
• Dinette couch with removable cushions and storage underneath
• Dinette table, teak, high-gloss finish with oversized teak pedestal, thru-bolted
• Electric range, 4-burner cook top, surface-mounted
• Exhaust fan, high velocity designed for exterior ventilation
• Garbage disposal in sink
• LED lighting - backsplash
• Lighting, overhead LED lights recessed in headliner with dimmer switches
• Maple interior cabinetry
• Microwave/convection oven located in upper galley cabinet
• Sink, stainless steel, recessed in countertop with satin nickel galley faucet
• High gloss teak Storage cabinets in upper galley with pull out drawers, varnished teak doors with finished maple interior
• High gloss teak Storage cabinets and drawers in lower galley, varnished teak doors and faces with stowage for utensils, and other items; finished maple interior
• Storage above dinette with pull out drawers
• Sub-Zero, large capacity, deep-drawer under-counter style with varnished teak faces, (2) refrigerator units and (1) freezer unit
• Water tank level gauge
• Crown molding in galley and dinette UPGRADE

• Awlgrip bilge areas with access hatches, snow white and lighted for easier maintenance and cleaning
• Carpeting, carpeted steps from galley through companionway
• Central vacuum unit connection with accessories
• Laundry center with stackable, front-loading washer and dryer behind teak door
• Lighting, overhead LED lights recessed in headliner
• Lighting in companionway steps
• Wall panels, natural color Majilite headliner individually installed with velcro backing for easy maintenance
• Teak toe kick at companionway steps UPGRADE
• Carpet runner, canvas UPGRADE

• Air conditioning with reverse cycle heat that circulates from concealed registers behind the valances to maximize comfort while minimizing noise and drafts - individual temperature control
• Bedspread - quilted, designer style
• Carpeting
• Closets, aft, twin maple-lined hanging closets with teak doors
• Credenza with (4) drawers
• Decorative LED indirect rope lighting from underneath bed platform
• Drawer storage under bed, (2) large drawers
• End tables each side of bed
• Entertainment center, Blu-ray player, stereo speakers recessed tied into salon stereo with remote control
• Headboard, upholstered
• King-size, walk-around bed with mattress, athwartship
• Lighting, overhead LED lights recessed in headliner with dimmer switches
• Majilite headliner natural color, 1/8" foam and tricot backing
• Mattress, Handcraft, Innerspring System #4 UPGRADE
• Pillow shams (2) with throw pillows
• Reading lights, overhead with separate switches
• Sheets (1 set), fitted with pillow cases
• Telephone outlet
• TV, 32" LCD flat screen
• Blue ray player UPGRADE
• Crown molding UPGRADE

• Air conditioning/heat with temperature control
• Bedspread - quilted designer style
• Carpeting
• Decorative LED indirect rope lighting from underneath bed platform
• Hanging locker, teak, maple-lined with bar for hanging clothes
• Lighting, overhead LED lights recessed in headliner with dimmer switches
• Majilite headliner, natural color, 1/8" foam and tricot backing
• Pillow shams (2)
• Queen walk-around bed with System #1 mattress and lift up top with gas pistons and maple-lined storage underneath
• Reading lights with separate switches
• Sheets, (1 set), fitted with pillow cases
• Crown molding UPGRADE
• Stereo speakers recessed, tied into salon stereo with remote control
• Storage cabinets, port and starboard sides of bed, teak
• Storage drawers under bed, (2) large drawers
• TV, LCD flat screen

• Air conditioning/heat with temperature control
• Bedspread - quilted, designer style
• Carpeting
• Decorative indirect rope lighting from underneath ed platform and behind valances
• Hanging locker, teak, maple-lined with bar for hanging clothes
• Lighting, overhead LED lights
• Custom headliner, UPGRADE
• Pillow shams (2)
• Sheets, (1 set), fitted with pillow cases
• Side by side bunks with System #1 mattress
• Stereo speakers tied into salon stereo with remote control
• Storage drawers located under hanging locker
• Upper/lower bunks with System #1 mattress and lift up bottom for storage in forward port stateroom
• 19" flat screen TV in each stateroom UPGRADE

• Air conditioning/heat with register
• Custom Amtico flooring
• Exhaust fan with vent in soffit
• Guest Head, One-piece molded bone Corian countertop with rounded edges and sink with satin nickel faucet
• Lighting, overhead LED lights recessed in soffit and in ceiling
• Linen Storage with shelves in master head
• Lower vanity with curved teak face
• Master, forward and port stateroom head countertop, (Maclaren) Ladolce Vita UPGRADE
• Master stateroom head, one piece custom frameless shower doors
• Medicine cabinet with mirrored doors
• Mirror upper vanity with storage insert behind doors
• Receptacle, 120V - GFCI
• Sealand Head System
• Shower light
• Stall shower, fiberglass with satin nickel shower fixtures and with drain to automatic sump pump in bilge
• Towel bar and ring - satin nickel

• All hardware metal finishes satin nickel throughout
• Designer bedspreads for all beds
• Designer carpet, nylon fibers
• Designer fabrics
• Designer shams (2) per stateroom
• Hunter Douglas silhouette, wood, or duette blinds
• Interior finish high-gloss, on vertical surfaces
• Prestige Decor Package
• Throw pillows throughout including designer cords and fringes
• Ultraleather seating in salon and master stateroom and dinette
• Upgraded window panel fabric and trim

• Back-up engine controls
• Bridge installed without exposed fasteners and toe kick
• Center console walk-around helm with electronic storage in raised pod and additional storage below
• Custom Release teak helm pod with single lever electronic controls and stainless steel steering wheel and trim tab control switches UPGRADE
• Depthfinder/Sea temperature gauge - Furuno RD-33
• Electronic trolling valve controls
• Engine shutdown switches at cabinet in console
• Extended overhang for extra room to move behind helm and companion seats with anodized aluminum aft railing
• Fire system control with automatic and manual discharge and override system located at console
• Fresh water outlet forward locker
• Freezer, top-loading, for bait and food storage, forward
• Gauges/electronic displays, include hour meter reading for main engines, supplied by manufacturer
• Handrails, powder-coated aluminum effectively positioned above ladder to bridge and at helm
• Instrumentation based on standard engine package, lighted with switches in radio box
• 12V outlet in radio box UPGRADE
• Lighted Ritchie compass, large and flush-mounted on centerline
• Lounge seating to port and starboard and at forward end of helm console with upgrade Ultraleather Buckskin covered foam cushions, hinged for access to storage under seats
• Stainless steel gas springs on flybridge bench seat hatches UPGRADE
• Octoplex touch screen control monitor with audible and visible alarms:  fire, engine room temperature, high bilge water, high exhaust temperature generator and tank monitors as well as confirming correct system operation
• Non-skid deck for traction and durability
• Port and starboard cabinet at aft end of lounge seating
• Recessed electronics box in console for custom electronics package that is easily viewable and protected from the elements by acrylic fitted lid with gasket and stainless steel gas pistons
• Recessed radio boxes, large radio boxes on port and starboard sides of console with switch panel inside
• Refrigerated drink box located at starboard forward corner
• Removable flybridge bench seat backrest forward facing at aft ends of port and starboard bench seats
• Sink with spray head at forward end of flybridge
• Stereo speakers, tied into stereo system in salon, and flush-mounted to aft ends of bridge with remote control
• Trim tab control switch mounted at console
• Trumpet style air horns, (2)
• Under helm access with lights and storage room
• VHF radio with antenna and mounts - ICOM IC-M604
• Release Marine teak helm chairs with upgraded fabric (Ultraleather Brisa Distressed Chamois), slide assembly, SS pedestal assembly and covers UPGRADE

• Anchor - constructed with a high-tensile, corrosion resistant aluminum magnesium alloy
• Anchor locker with access from foredeck
• Anchor rode, 300' with 12' of chain
• Awlgrip bilge areas with access hatches, snow white and lighted using magnetic switches for easier maintenance and cleaning
• Customized Bow rail, anodized aluminum, brushed finish
• Fire extinguishers
• Fresh water wash down at bow in anchor locker
• Holding tank monitor
• Mooring lines, 3-strang nylon
• Ships bell
• Side-mounted grabrails, powder-coated aluminum that follows the window line
• Stainless steel bow, spring and stern cleats thru-bolted to aluminum backing plates
• Water delivery kit with tool set
• Wrapped hatch carpet installation
• Zinc on transom

• S&I additional fuel tank for a total of (3) - Std
• S&I Release teak helm pod
• Plumb transom box as live well without window & lights
• Delete bow pulpit, install bow cleats fore and aft
• Salon forward window mask - no warranty on cosmetic finish
• S&I (DC) bow thruster w/control button in single lever handle
• Refrigerate port mezzanine undermounted step box
• Costa, Carpet runner, full canvas
• Costa, S&I canvas companionway carpet runner with step covers
• S&I 19" flat screen television in port aft stateroom
• S&I 19" flat panel television in port stateroom

• Upgrade engine package - Caterpillar C32-A @ 1925 mhp
• Install two tool boxes in engine room, 4 drawer, 12" wide, painted white
• Paint PVC trim at engine room
• Install switch in engine room for lights in fighting chair
• S&I 12V outlet in radio box
• S&I stainless steel gas springs on flybridge bench seat hatches
• CAT MPD displays in hardtop drop-down box
• Upgrade FB cushions to Ultraleather Buckskin
• Install gauges with chrome bezels in helm pod
• Ice machine with discharge into starboard mezzanine box
• (3) rod holders in each haunch for a total of (6)
• Seawater supply and fitting for additional on-deck livewell, 2 fitting (1) on each side
• Transom:  solid coaming with transom box, no window
• Cockpit freezer bait trays
• Install Release Marine boltless rod holders
• Install ball valve on transom box discharge to allow box to be pressurized while running
• S&I threaded cockpit scuppers
• Install tri color lights red/white/blue in cockpit overhang
• Install tri color rope lighting red/white/blue in cockpit
• Run wires to fighting chair deckplate for lights
• Run wires to cockpit for future installation of outlets
• Install polished threshold
• Temp mount running, transom, and mast light - boat to get hardtop
• Bow rail - custom
• Bottom paint to be Viking blue
• Custom boot stripe 
• Install teak toe kick at companionway steps
• Install switch in salon for hardtop lights
• Install crown molding in salon, galley and dinette
• Mattress in master stateroom to be upgraded to System #4 (queen)
• S&I blue-ray player in master stateroom
• Install crown molding in master stateroom
• Install crown molding in forward stateroom
• Custom Release Marine teak helm chairs w/upgraded fabric, slide assembly, SS pedestal assembly and covers
• Hardtop - custom molded hardtop with brushed pipe and recessed teases, 3-sided track enclosure and 41' Rupp riggers See details below

• (1) Tuna Tower w/Molded Top 62' Convertible 8' Gap, Brushed Pipe (2) Antenna, Stand-offs, No Halyards, 3 Sided Track on Bimini Rail
• (6) Hardtop Lights to be tri-color Lumitec Lights w/Fiberglass recess (blue, white, red)
• (1) Radar Pod Large Oval Style, Mold #973 w/Sliding Door for Teaser Reels
• (1) Molded Standing Platform w/Coupler Box On Platform
• (1) Molded 2 in 1 24V-LED Light Pod w/ S/S Bezel
• (1) Molded 24V-LED Light Fwd Platform S/S Bezel
• (1) Control Box 63" w/Flush Mounted Compass
• (2) Recessed Electronics Box With Lid
• (1) Control Box Cover
• (1) Paint Top of Control Box Satin Black
• (1) Tower Sunshade Molded w/Internal Tracks, 5 Welded Antenna Mounts
• (1) Antenna Mount SAT V3 Dome Hardtop Fiberglass Molded Into Radar Pod
• (1) Bridge Rail, Leg to Leg, Double Aft to Outer Main Leg
• (8) Rod Holder Polished Weld to Rail PBT Style
• (6) Rod Holder Polished Aft Legs 3-P-3-S PBT Style
• (1) Controls & Steering CAT Controls (no LCD readout)
• (1) U-Shaped Safety Rail Around Ladder Opening
• (1) 43' Outrigger Rupp Bigg Riggs, HD 3 Spreader, Bridge Release Large Solid Aft Bar Installed
• (1) Rigger Locks
• (1) Rupp Rollers Installed on Outriggers IPO Eye Bolts
• (1) Install Outrigger Rupp
• (1) Center Rigger Rupp
• (2) Recessed Electric Teaser Reels MIYA EPOCH US9 HD 24V
• (1) Wash Down Water in Tower
• (1) Flag Staff Aft
• (1) Nav. Lights Port & Stbd Molded (Wired & Hooked Up)
• (1) Stern Light Molded (Wired & Hooked Up)
• (1) Electronics Box Electric Fold Down
• (1) Wrapped Rybo Style Belly Band Cushion
• (1) Enclosure 3-sided Track to Track to Edge Jump Seat Backrest, EZ2CY
• (3) Air Vents Fwd Top Panels
• (1) Powder Coated Aluminum Flangeless Track
• (1) Wire & Hookup (3) Spreader Lights, Teaser Reels, Masthead Lights, Anchor Light under Control Box, Bond Tower, (6) Tri-color Hardtop Lights
• (1) Weld Flag Staff Each Side Platform Perimeter Rail
• (2) Release Outrigger S/S Grommets Mounted in Cockpit Gunnels
• (2) Lumitec (2) Tri-Color LED Lights w/Fiberglass Recess in Sunshade Top
• (1) Wire (2) Lumitec Tri-Color LED Lights Underneath Sunshade, (2) Lumitec Tri-Color LED LIghts Underneath Platform
• (2) Lumitec Tri-Color LED LIghts Under Platform w/Fiberglass Recess
• (1) Paint Tower Sunshade Frame Satin Black
• (1) Upgrade Tower Fwd X Brace, Side Diaginals, and Hardtop Brace to Contour Style