- Builder:
- CAMANO
- Category:
- Motor Yacht
- Sub Category:
- Pilothouse
- Model Year:
- 2005
- Year Built:
- 2005
- Country:
- United States
- Fly Bridge:
- Yes
- Cockpit:
- Yes
Unfortunately, this boat is not available for sale. It will be removed from the website soon.
CAMANO - available for sale:
Yachts with similar parameters:
Additional Specs, Equipment and Information:Boat Name Rianna D Specs Builder: Camano Yachts Ltd. Designer: Bob Warman Hull Shape: Semi-Displacement Dimensions LOA: 31 ft 0 in Beam: 10 ft 6 in Length on Deck: 28 ft 0 in Maximum Draft: 3 ft 3 in Displacement: 12000 lbs Engines Total Power: 200 HP Engine 1: Engine Brand: Yanmar Year Built: 2005 Engine Model: 4LHA-DTP Engine Type: Inboard Engine/Fuel Type: Diesel Engine Hours: 230 Drive Type: Direct Drive Engine Power: 200 HP Cruising Speed: 13 mph Tanks Fresh Water Tanks: (77 Gallons) Fuel Tanks: (133 Gallons) Holding Tanks: (14 Gallons) Accommodations Number of single berths: 4 Outside Equipment/Extras Electric windlass |
Manufacturer Provided Description The Camano Troll is a 31-foot boat with a flybridge that includes three pedestal seats, an adjustable centre seat with slider, and a stainless steel steering wheel. Built in British Columbia and designed for this coast, an area well known for high quality boats, the Troll was designed by Bob Warman to meet the demand for a boat with a comfortable 12-knot cruise speed that retains a high resale value. With a 10-foot 6-inch beam for stability and 5 feet of freeboard at the bow, weather is not going to threaten this boat. The interior offers the same usable room as many 33-foot production boats and is much easier to handle. With the standard bow thruster one person can dock the boat even in very tight spots. The Camano features an open cruising layout (salon and aft deck on the same level), with a full-size bridge. The open, bright interior provides great visibility from any part of the seating area with its picture window view. The interior is light and friendly. Cabinets and trim are mahogany, the cushions are covered with premium fabrics and the floor is carpeted. |
Accommodations Accommodations are as open as possible - the salon measures 8-feet, 10-inches by 10 feet and is on the same level as the aft deck which is 40 square feet. The dinette easily converts to a double berth while the forward berth has a filler available to make a double. The Camano comes well equipped with 110-V dockside package, pressurized hot and cold water at the galley
|
Galley & Head The galley and head are half a level down, with a U-shaped galley out of the traffic area but still open to the salon. With a large counter area extending under the sidedecks there is lots of room for 2 burner stove, refrigerator, microwave, and large sink. Storage space is provided including dishlocker outboard of the fridge. The shower is built in as a part of the head area.
|
Navigation & Electronics
|
Mechanical & Structural The Keelform hull is the result of a science program of the University of British Columbia and Camano Marine. Keelform is a unique bottom shape with large displacement keel and very wide waterline beam. Test results show almost no planing angle change or "hump" in the horsepower curve between displacement and planing speeds which, in the case of a boat this size, is between 7 and 15 knots. While most semidisplacement boats are straining and reaching their horsepower limit, the Camano is cruising comfortably up to 18 knots. The hull reduces fuel consumption in the most widely used speed range - between 12 and 18 knots; can be stabilized to prevent the boat from rolling in rough seas; runs 19 - 20 knots top speed, with a single 200 hp Diesel engine; and provides a smooth, dry ride in rough water because of a special flare in the bow section. Engine failures are extremely rare with Diesel engines and if they occur, 99 per cent of all cases are due to contaminated fuel. Commercial boats and fishing vessels which operate year-round in all kinds of weather conditions usually have only one diesel engine. Most boat builders whose brochures mention "hand-laid fiberglass" use chopper guns to replace the traditional fiberglass mats by "chopped strand," which are only two-inch long glass fibers wetted with resin by the "chopper gun" and sprayed into the mold. Only the woven rovings are rolled or "laid in" by hand. The hull of the Troll is 100 per cent hand-laid, with no "chopped strand," and thicker than the hulls of comparable production boats. The boat has a heavily built, very strong inner liner laminated into the lower portion of the hull; the bulkheads are thoroughly laminated into place from both sides as are the other parts of the interior. The impact and tear strength of a Camano hull is ten times higher than most production boats. Running aground with the Troll is not a problem. Prop, prop shaft and rudder of the Camano are protected by a heavily reinforced skeg and keel shoe. The inboard diesel combined with the available electric bow thruster result in a handling advantage even over twin stern drives. |
Deck Equipment
|
Disclaimer The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. |