- Builder:
- IRWIN YACHTS
- Category:
- Center Cockpit
- Sub Category:
- Deck Saloon
- Model Year:
- 1990
- Year Built:
- 1990
- Country:
- United States
- Vessel Top:
- Dodger
Industry leader in
sales and service of boats, ships since 1959.
№1Unfortunately, this boat is not available for sale. It will be removed from the website soon.
IRWIN YACHTS - available for sale:
-
morePerception 52' IRWIN YACHTS 1989 $229,000 USD
-
moreTengu 38' IRWIN YACHTS 1989 $69,000 USD
Yachts with similar parameters:
Enchante' - IRWIN YACHTS
Specifications
- Accomodations:
- 3 staterooms
- Length:
- 52' 6" (16.00 m)
- Beam:
- 15' 4" (4.67 m)
- Draft:
- 7' 2" (2.18 m)
- Year Built:
- 1990
- Builder:
- IRWIN YACHTS
- Category:
- Center Cockpit
- Engines:
- 1 engines Yanmar
- Cruise Speed:
- 8 Kts. (9 MPH)
- Location:
- N.E. - Maine to NYUnited States
- All Specifications
- Overview
- Detailed Information
Basic Information
Dimensions
- LOA:
- 52' 6" (16.00m)
- LWL:
- 44' 0" (13.41m)
- Beam:
- 15' 4" (4.67m)
- Max Draft:
- 7' 2" (2.18m)
Speed, Capacities and Weight
- Cruise Speed:
- 8 Kts. (9 MPH)
- Cruise Speed RPM:
- 1800 Kts.
- Displacement:
- 46500 Pounds
- Water Capacity:
- 420 Gallons
- Holding Tank:
- 25 Gallons
- Fuel Capacity:
- 360 Gallons
Accommodations
- Total Berths:
- 7
- Sleeps:
- 11
- Total Heads:
- 2
Hull and Deck Information
- Hull Material:
- Fiberglass
- Deck Material:
- Fiberglass Sandwich
- Hull Configuration:
- Bilge Keel
- Hull Color:
- Lt Gray
- Hull Finish:
- Plastic
- Hull Designer:
- Ted Irwin
Engine Information
- Engines:
- 1
- Manufacturer:
- Yanmar
- Engine Type:
- Inboard
- Fuel Type:
- Diesel
Overview
This vessel would be great for extended cruising, coastal family cruising or liveaboard.Accommodations
Aft to port is large sit-down chart table, and across to starboard is large in-line galley with passageway aft to washer/dryer, and into a full width owner's stateroom with queen berth, several hanging lockers and separate head with enclosed shower stall.
Galley
Electronics
Matrix AIS VHF 2013, with back-up Horizon Standard VHF
Garmin GPS/Chartplotter (Pedestal), with back-up Furuno GPS
Radar Raytheon RL70
Raymarine, depth, knot/log, wind angle/speed indicator (All displays are mounted at pedestal and new in 2010)
Autohelm 7000 autopilot w/remote - New 2010
Bow-thruster, Side-power - new 2013
EPIRB 406
Alpine CD/AM/FM Cassette System, complete speakers throughout vessel.
TV antenna mast mounted
Fog-horn mounted on mast
Compass Sunuto
Interior Equipment
Washing machine - Washer & Dryer
Trash Compactor
Refrigerator - Large stand-up Refirgerator
Deep freezer
Air conditioning
Electric bilge pump - 2 Electric bilge pumps
Battery charger
Electric head - Both heads electric
Sea water pump
Hot water
Manual bilge pump
Heating
Electrical Equipment
Push button circuit panel with battery condition indicator
Battery selector switch
Invertor Zantex 30 amp
8 KW Generator
12V lights includes (19) cabin lights, international running lights, masthead and spreader lights, engine room light.
110V AC system includes two 30 amp shore power cords.
Eleven 110V double plug outlets below.
110V AC breaker, power available and reversed polarity indicators and 30/50 splitter
2-Electric bilge and sump pumps with automatic float switches.
100 amp alternator
Additional Electrical
Generator
Shore power inlet
Engine and Mechanical
1990, 110 hp, 4 cylinder Yanmar diesel engine, fresh water-cooled
2.5:1 reduction gear box
Three blade bronze prop, stainless steel prop shaft, stainless steel shaft strut
Molded engine mount/pan
Seawater intake strainer
Raw water cooled exhaust
360 gallons fuel in two baffled, molded fiberglass tanks each with fuel shut off valves, switch over valve and auxiliary electric fuel pump, auxiliary water separator fuel filter
Foam insulated engine room with molded mount for main engine and genset
Automatic fire extinguisher system
Light in engine room
|
Sails, Rigging and Winches
Furling Genoa
Furling Staysail
Large Cruising Drifter-
Grey sail covers for main 2012
Tapered main mast stepped on the keel.
PVC wiring conduit in mast
Main standing rigging includes double lowers, upper shrouds/stays of 5/16? stainless steel 1x19 wire, all with rotary swaged terminals /replace with new rigging 2010.
Headstay and inner stay have Schaeffer roller furling
Main boom has boom vang, sheeting, internal, outhaul, jiffy reefing pennants with clam cleats, adjustable topping lift
Halyards lead to individual halyard winches lead aft (Electric main halyard).
Removable staysail rigging with running backstays
#32 Barlow 2 speed, Electric, ST (2) Primaries
#24 Barlow ST Main Sheet
#24 Barlow ST (2), Electric, Halyard winch.
Hull and Deck
Hull, deck and interior components molded in Irwin Lt gray gel coat.
Decks molded with light gray deck, with teak over-lay.
Hull is foamed cored above the water line, to stiffen laminate and provide added insulation
Thru-bolted bronze seacocks on all thru-hulls below waterline
Laminates were carefully scheduled, pattern cut and applied layers of gel coat, laminating polyester resins, glass mat and 24 oz. woven roving or bi-axle glass fiber
Horizontal deck surfaces are cored for added stiffness and insulation
Hull-to-deck joint by deck overlap of interior hull flange with both chemical and mechanical bonding.
60lb. CQR Anchor , with 180' chain.
45 lb. CQR with 30' chain and 200' rode.
Custom welded stainless steel double bow and stern pulpits, with running light mounts
Vinyl covered 5/16" stainless steel double lifelines
Stainless steel stanchions installed Irwin socket system
Lifeline gates port and starboard
Stainless steel mast pulpit
Gate in stern rail
Divided anchor rode locker with chromed bronze deck pipe
Welded aluminum bowsprit with stainless steel rod bobstay
(2) Metal anchor rollers.
Dingy Davits
Deck storage aft with hinged deck hatch
LPG locker with hinged deck hatch includes two propane tanks
Chromed bronze water, fuel, waste deck fittings
(4) 12" aluminum cleats, (2) 9" cleats
Teak toe rails
Cabin top grab rail
Drip molding
Barbeque grill mounted on stern
Fresh water deck wash
Modified long keel with cast lead ballast secured and sealed inside molded fiberglass keel.
Polyurethane royal blue cove and boot stripe accents
Teak rub-rail with stainless steel striker
Bottom paint (4/15)
High performance half skegged, counter-balanced molded fiberglass foam filler with stainless steel web core welded to 1 ½" solid stainless steel rudderpost Irwin high load cast epoxy bearing in stainless steel heel strap.
Bronze sprocket driven stainless steel chain and cable steering system
Bronze turning sheaves and quadrant, quadrant stops
Emergency tiller
Manual Bronze rack and pinion to chain drive autopilot
|
Extra Deck Equipment
Cockpit shower
Tender
Cockpit table
Outboard engine brackets
Deck washdown
Davits
Liferaft
Cockpit cushions
Teak cockpit
Radar reflector
