- Deck is a balanced composite laminate utilizing BPA epoxy resin, uni-directional "E"-glass
reinforcement, and high strength/stiffness premium sealed balsa coring.
- Deck coring windows are located at all hardware installations to maintain the watertight
integrity of the deck coring.
- Deck is locally reinforced at high load areas with additional plies of bidirectional "E"-glass
reinforcement
- Molded in aluminum backing plates are found on highly loaded deck hardware- Hull construction is a vacuum infused BPA epoxy, unidirectional "E" glass, and synthetic cored
laminate locally reinforced with carbon fiber.
- Synthetic foam coring is used for maximum impact resistance, stiffness, strength, and light
weight. The cored hull also offers superior hull insulating properties, both thermal and
acoustical
- Hull to deck joint is secured with 1/4-20 stainless machine screws installed on 4" centers through
the full-length 6061 T6 aluminum backing plate imbedded in the hull flange and sealed with
3M 5200 adhesive sealant, which exceeds the recommended installation requirements of the
ABS scantling for offshore sailing yachts.
- Structural fiberglass longitudinal and athwartship grid bonded to hull and deck, utilizing
methylmethacrylate adhesives
- 3,500 lb.(1588 kg), epoxy coated, lead, high-lift fin keel design- Keel area hull laminate is reinforced with multiple plies of high-tensile carbon-fiber
unidirectional reinforcements.
- Stainless steel keel bolts
- Elliptical, foam-cored rudder blade with unidirectional E-glass skins
- Oversize 304 stainless steel rudder post
- Forespar marelon thru-hull fittings throughout
- Anchor locker, foredeck access
- Fortress FX-16 Anchor w/chain & rode
- 4 Harken 44 power ratio 2-speed self-tailing winches; cockpit, coming, port & starboard mounted
- 2 Harken 32 power ration 2-speed winches; cockpit, cabin top mounted, port & starboard
- 3 Winch handles (1 onboard)
- 2 Winch handle pockets, cockpit mounted- 2 Harken ball-bearing adjustable inboard genoa tracks and cars with adjustment lines led
to cockpit
- Stainless steel mast collar with stainless halyard organizer plates
- 2 Harken deck turning blocks for aft-led halyards
- Spinnaker sheets & twings
- Headsail sheets
- Lewmar Ocean Series size 60 aluminum foredeck hatch with fly screen
- Lewmar Ocean Series size 30 aluminum main cabin vent hatch with fly screen
- Lewmar size 10 vent hatch with fly screen
- 3 Lewmar size 0 ports
- Lexan sliding companionway hatch on aluminum and delrin glides
- Marine grade polymer lockable companionway hatch board.
- 4 Stainless steel hand holds, cabin top mounted, port & starboard
- 4 Cleats; 2 at bow, 2 at stern
- LPG locker, vented overboard, w/LPG tank (11 lbs) and solenoid cut off valve
- Lazarette locker
- Cockpit locker
- Cockpit shower w/hot and cold running water
- Deck scuppers- Stainless steel bow pulpit, port and starboard stern rails, connected by double life lines
with port & starboard gates aft at cockpit
- Navigation, running & anchor lights
- Fuel fill; port side aft
- Waste pumpout; port side midship
- Water fill; starboard side, midship
- Dock lines
- Fenders