Industry leader in

sales and service of boats, ships since 1959.

№1
  • image description

Thank you!

We have received your message and will get back to you shortly.

charter consultation sended

Unfortunately, this boat is not available for sale. It will be removed from the website soon.

ISA YACHTS - available for sale:

Yachts with similar parameters:

Find a yacht

SILVER WIND - Hybrid - ISA YACHTS

SILVER WIND - Hybrid 143' 2" ISA YACHTS 2014 PRICE ON APPLICATION
Search another yacht →

Specifications

Accomodations:
4 staterooms
Length:
143' 2" (43.63 m)
Beam:
27' 3" (8.30 m)
Draft:
5' 0" (1.51 m)
Year Built:
2014
Builder:
ISA YACHTS
Category:
Motor Yacht
Engines:
2 engines MTU 16V4000M93L
Cruise Speed:
26 Kts. (30 MPH)
Max Speed:
32 Kts. (37 MPH)
Location:
Italy - North CoastItaly
Buy a yacht buy another yacht from our catalog
  • All Specifications
  • Overview
  • Detailed Information

Basic Information

Builder:
ISA YACHTS
Category:
Motor Yacht
Model Year:
2014
Year Built:
2014
Country:
Italy
Fly Bridge:
Yes

Dimensions

LOA:
143' 2" (43.63m)
LWL:
119' 9" (36.49m)
Beam:
27' 3" (8.30m)
Max Draft:
5' 0" (1.51m)

Speed, Capacities and Weight

Cruise Speed:
26 Kts. (30 MPH)
Cruise Speed Range:
540
Max Speed:
32 Kts. (37 MPH)
Gross Tonnage:
240 Pounds
Water Capacity:
1321 Gallons
Fuel Capacity:
8189 Gallons

Accommodations

Total Berths:
8
Sleeps:
8
Total Heads:
5
Captain Cabin:
True
Crew Cabin:
4
Crew Berths:
5
Crew Sleeps:
5
Crew Heads:
3

Hull and Deck Information

Hull Material:
FRP
Deck Material:
Teak
Hull Configuration:
Modified V-Hull
Hull Color:
Silver Grey
Hull Designer:
ISA
Exterior Designer:
Andrea Vallicelli
Interior Designer:
Nuvolari Lenard

Engine Information

Engines:
2
Manufacturer:
MTU
Model:
16V4000M93L
Engine Type:
Inboard
Fuel Type:
Diesel

Overview



General Description

The yacht is designed with a planning, proven "Modified V" shaped hull powered by twin MTU 16V 4000 M93L Diesel engines connected to two jet drives. Also attached to the reduction gearboxes is a hybrid EcoProp propulsion system by Siemens® , which allows to cruise at low speed with the two jets powered by two electric motors. This yacht is designed and built in accordance with RINA Rules for Charter Yachts and MCA LY2 Code requirements.

The Builder              : ISA GROUP srl-Ancona
Exterior stylist          : Andrea Vallicelli
Interior design          : Nuvolari Lenard
Naval Architecture   : ISA Shipyard Ancona

The yacht has three decks:
1.    Lower Deck
2.    Main Deck
3.    Sun Deck

Accommodation

The vessel's accommodations are as follows:

Guest Area: 
Master Stateroom at main deck
VIP Stateroom
Two guest Cabins (double bed)
Massage & Beautician Spa Room with sea balcony.

Crew:
Three Crew Cabins, One Captain Cabin

Main Specifications

LOA:   43.63 m
LWL:  36.49 m 
Moulded Beam:  8.30 m
WL Beam:  7.31 m
Moulded Depth:  4.05 m
Design Draft at Full Load:  1.51 m
Light Ship Weight: 195 tons
Displacement at Full Load:  240 tons
Displacement at Half Load: 215 tons
Trial Displacement:  210 tons
Gross tonnage:  298 GRT
Fuel capacity:  31.000 litres
Fresh Water Capacity:  5.000 litres

MACHINERY
Main engine type 2 x MTU 16V 4000 M93L
Main engine power 2 x 3440 KW @ 2100 rpm
Propulsion 2 x water jets KAMEWA 80 S3
Generators 1x 135 KW + 1x 275 KW + 2x125 KW shaft generator
Stabilization system Fixed Fin with electric motor

Speed and Range

The yacht on sea trials ran at a maximum speed of 32 knots and a cruising speed of 26 knots. The cruising speed corresponds to the 75% of the maximum power. The yacht is estimated to have a range at cruising speed of 26 knots of 540 nm, on the basis of 31000 lt fuel. Total fuel consumption will be determined by the MTU monitoring system and considering the fuel consumption to power the electrical equipment in use in day navigation in accordance with the electrical load schedule. When in hybrid mode, the yacht cruises at low speed of 8 knots with two main engines OFF; the two waterjets are then powered by the two electric motors connected to the gearbox PTI. The two diesel generators supply power to both the general switchboard.

Hull

The all-composite hull of the vessel is of Fibre Reinforced Plastic (FRP) construction producing a single, strong and durable structure. The exclusive use of the composite materials in the manufacture of the hull offers benefits in terms of improved thermal and noise insulation, resistance to corrosion, strength and less maintenance.

The Composite construction provides an excellent balance in terms of weight savings and vessel's performance achieved through the use of state of the art construction techniques with proven success. Materials used for the construction of the hull have been fully approved by the Classification Society.

Superstructure

The yacht's superstructure are also constructed in Fibre Reinforced Plastics with PVC cores and local reinforcements. The result is a single, strong, lightweight and durable structure. Exclusive use of composite materials in the manufacture of the deck and superstructure offers the benefits of an improved thermal and noise insulation, easy maintenance and reduced weight.

General Painting

Hull topside and superstructure are meticulously faired and finished in a metallic light grey paint. 
Bands in the way of window lines are painted black.

Propulsion and Generation

General
The main propulsion system consists of two marine diesel engines driving two water-jets through reduction gear-boxes.
The two lateral gearboxes drive a variable displacement hydraulic pump. Those provide oil pressure to operate the jet steering system.The main ship electrical generation power system consists of two variable speed diesel generators and one shore connection.
Main engines and generators are resilient mounted to minimize noise and vibration.
The yacht is also equipped with a hybrid propulsion system, EcoProp by Siemens®, which allows it to cruise at a safe low speed of 8 Knots with the two jets powered by two electric motors connected to the gearbox PTI. The system includes the following: 2x gearboxes by ZF, with Power Take In to connect an electric motor / shaft generator 1x Variable speed diesel generator of 135 KW in a sound shield 1x Variable speed diesel generator of 270 KW in a sound shield 1x Central main switchboard 2x Frequency drives for control of electric propulsion 2x Switchboards for ship electric loads, including power filters 1x Propulsion power management system 2x Electric motor / Shaft generator of 125 KW.

Main Engines
Two diesel engines MTU 16V4000M93L rated at 3440 kW at 2100 RPM are installed in the engine room. The engines are flanged to the ZF gearboxes, which are provided with a PTO to connect one electric motor of 125 KW. During the navigation at cruising speed, the electric power for the ship is generated by the
two shaft generator on the gearbox PTO. In this mode, the two diesel generators are OFF.

Main Generators
The vessel is provided with two diesel generators of 135 KW and 270 KW respectively, 380 V, 50 Hz 3 phase, variable speed, resiliently mounted and installed with in sound shields. A Power Management System (PMS) is used to control the load sharing, auto-start and shut down of generators. Synchronizing facilities shall be provided and the two generators shall be capable of automatic parallel operation. Each main generator shall be capable of selection as stand-by unit and to be started automatically on blackout.

Shore Connection
A 100 KVA shore connector/isolation transformer shall is installed. The shore power switch board is incorporated into the main switch board. One 30 meter length, 125 A, 400 VAC 50 Hz 3 phase white shore power cable of soft type is connected to the transformer.

Water-jets
Twin KaMeWa 80 S3 water-jet assemblies, complete with standard equipment as supplied by the water-jet maker are installed. 

Piping

All plumbing is of approved marine type using non-corrosive materials appropriate for the intended application. All piping shall be arranged neatly and in good marine practice. All through hull fittings are bronze and/or fibreglass installed in accordance with R.I.NA and Builders standard detail.

Generally piping material used through the yacht is as follows:
Sea intakes: GRP
Sea water: Cu-Ni 90/10
Fresh water: Stainless steel in the engine room and polypropylene outside
Black water: PVC outside engine room and s/steel in the engine room
Lubricating oil: Steel
Hydraulic fluid: Steel
Compressed Air Stainless steel AISI 316
Fuel: Steel
Drainage: Flexible nylon reinforced hose w. double stainless steel hose clamps
Bilge: Cu-Ni 90/10 pipes and fittings with bronze or stainless steels valves and strainers.
Fire main: Cu-Ni 90/10 pipes and fittings with bronze or stainless steels valves and strainers.

Air Conditioning

An air conditioning plant with centralized units. In general all living quarters and interior spaces is provided with fan-coil units that receive their fresh air through fresh air units. All sanitary spaces are provided with forced exhaust ventilation. The air conditioning system is designed and installed with the purpose of providing the maximum comfort of the guests and crew through the control of: temperature, humidity, air purity and velocity.

Anchor Windlasses

Two MZ Electronics vertical electrical windlasses by 5.5 KW with capstans are installed on the foredeck.Control of the windlass is by a portable control with four meter wandering cable. A watertight electrical socket is provided in the foredeck area; when not in use the control is stored in a small locker in the foredeck hatch structure.

Warping Capstans

Two MZ Electronics electric capstans by 4.0 KW are mounted on the aft deck. Capstans are mounted so as to facilitate warping of the vessel with minimal interference to walkways and companionways. Capstans are operated via adjacent flush mounted fully sealed watertight foot switches.

Stabilizers

One set of full electric non retractable type anti-rolling fins are installed. The fins are constructed in fibre-glass with steel reinforcements. The system is designed to work dynamically underway as well as at zero speed when the boat is at anchor.

Bow Thruster

The yacht is equipped with a 55 KW electric bow thruster with two counter rotating propellers, placed in a dedicated tunnel, integrated into the hull structure. The thruster motor is controlled with a frequency drive.

Steering Gear

The steering system is integrated in the KaMeWa waterjet system. It is hydraulically powered through dedicated hydraulic pumps for each waterjet.

Stern Platform

A stern sliding platform is installed at stern of the yacht, integrated in the rub rail. The platform provides up-down function.

Stern Gangway

The vessel is outfitted with a gangway integrated into the aft main deck area. The gangway is of a electro/hydraulic type and is equipped with a remote control.
The aft gangway includes the following features:
Extension over the swimming platform of about 2.2 meter.
Tilting capabilities (15° both up and down)
LED lights
In the underside a recessed track for fitting the telephone cable
Stainless steel hand railing
When the aft door, giving access to the beach area is open, the gangway is not operable.

Teak Deck

Teak decking is applied to the horizontal surfaces of the main deck, and the transom steps and aft platform. Teak decking has a minimum thickness of 10 mm with a 50 mm wide waterways. The deck is traditionally laid with king-planks, bevelled raised margin plank at the superstructure sides, covering planks around the perimeter and proper detailing around the equipment installed on the deck surfaces.

Electric System

The vessel's electrical system is designed in general accordance with Classification Society and MCA requirements for short range. The vessel's AC electrical distribution system 400 V 50 Hz 3 phase four wiresystem with grounded neutral. Generally all the electrical motors, are 400 VAC, 3 phase, 50 Hz. Low power motors, are generally 220 VAC single phase 50 Hz. All large system motors are T.E.F.C. (totally enclosed) and class F insulated suitable for marine use. All motors are fixed on resilient mounts and mounted to ensure good circulation & ventilation; all motors over 5.0 KW power are electronically controlled by means of inverters. Electrical junctions accessible for service. The vessel's DC electrical distribution system is 24 VDC. The DC system is designed to provide for charging by static chargers of appropriate size, and shall incorporate switching to allow the starting of any main or auxiliary engine. The system also provides power for emergency lighting, fire detection and alarm systems. Radio communications equipment supplied by AC is provided with an automatic changeover to emergency batteries in the event of AC power failure.

Machinery Controls, Alarms and Instruments

The vessel is equipped with a monitoring system to monitor and provide alarm function for the vessel's equipment. The main station fitted in the pilothouse, with a group display at crew's lounge and engine room.

The following screens are displayed in the system:
Tank levels and high level alarms
Bilge system
Hybrid Ecoprop diagnostic
Battery chargers and batteries
Watertight doors and hatches
Fire dampers
Power Management System (ship to shore; shore to ship)
External lights
Main Engines
Main Generators
Miscellaneous

Electronics / Entertainment System

The organic integration of the systems that form the means of interface and control between the Owner, Guests and Crew represents the most important design principle of Entertainment, Communication, Security and Navigation systems. This unified approach requires that the architecture of the main electronic system be based on network framework and cabling which are, as far as possible, shared. Integration is intended as:
effort to unify user interfaces; TCP/IP units; use of modular elements that can be assembled and connected in different ways to customize the system tailoring it to the Owner’s needs.The fields to which this philosophy is applied are: digital entertainment with top level displays, amplifiers and speakers; full internet connectivity; worldwide coverage for telephony and fax; high level security and CCTV system; home automation services (lights control, curtains control, HVAC control).The following represent the general design rules applied for the selection of the main devices: use of last­ generation devices to have the most current model at time of delivery; use of world wide distributed leader brands in the selection of devices in order to guarantee world-wide assistance. 

Classification and Certification

The yacht is built under the survey of and in full accordance with the R.I.N.A Rules for the Classification of Charter Yacht including additional rules applicable to pleasure vessels for the assignment of the MCA LY2 Short Range Yacht compliance certificate and all amendments and notices issued up to the date of signing the Vessel.

Brokers Comments

One of the many aspects which make this motor yacht special and unique is her propulsion system. Together with a "traditional" propulsion system consisting of two marine diesel engines driving two Rolls-Royce Kamewa water-jets through reduction gear-boxes, which allow the yacht to run at the maximum speed of 32 knots and a cruising speed of 26 knots, the new ISA140 is equipped with a hybrid propulsion system supplied by Siemens, a world leader in the manufacturing of hybrid systems, which allows the following operational modes:

*Navigation at high speed with two main engines ON; the electric power for the ship users is generated by the two shaft generator on gearbox. In this mode, the two diesel generators are OFF.
*Navigation at low speed of 8 knots with two main engines OFF; the two water-jets are powered by the two electric motors connected to the gearbox. The two diesel generators also supply power to the electric users. The total fuel consumption is 90 l/h for a range of 2600nm, so extremely important for yacht transfer without guests onboard, as consumption goes from 55 l/Nm at max yacht speed to 11 1/Nm with electric mode on.

The advantages of hybrid propulsion are countless. The large flexibility of operation modes int he first place. Then, depending on the operation mode of the vessel, the main engines and generators run less hours per year and when in operation, at higher loads. Both lead to less required maintenance cost. What is more, the main and auxiliary diesel engines can always operate at its peak efficiency, thus reducing the specific fuel consumption and gas emission. This shall also result in a drastically lower noise level in overall yacht ambient. It is expected that at 8 knots people on board should have a feeling as to stay on a sailing yacht. Last but not least there is a drastic improvement of redundancy. If the generators fail, two shaft generators will operate the electric users; if the main engines fail, the two generators can power the propellers.

A further exceptional element is her fully custom-made bridge. ISA in-house electronic department coordinates a panel of important names in the field of electronic navigation systems, such as TRANSAS, which made the bridge concept, TEAM ITALIA, which designed the bridge console and ROLLS-ROYCE, which provides the custom-made waterjets control system. The result is a highly technological and pioneering I-Bridge, second to no other in terms of customization and integration, always in full compliance with safety regulation.

The ISA 140 series produces the company's largest semi-custom superyachts of composite construction with hull and superstructure built from Fibre Reinforced Plastic [FRP). The composite parts of ISA 140, such as the hull, the deck, the superstructure and the accessories, have been built with vacuum assisted resin infusion [VARTM). In particular, the hull is one of the biggest one ever made on a single mould and at one go. The result is a product with superior features in terms of lightness and stiffness, compared to the boats of the same category made with traditional techniques.

Exterior design is the work of Andrea Vallicelli which carries a bold and dramatic feel from the exterior through into the interior spaces. Strong diagonal lines run from the sundeck to the stern, mirroring the flair of the distinctive sweeping staircases. With her 4 cabins, ISA 140 can accommodate 8 guests, who can enjoy navigation and at- anchor relaxing moments on the yachts extensive outdoor spaces, a huge sundeck and a cosy beach area with a generous swimming platform. Comfort at anchor is guaranteed by fixed fin stabilizers with electric actuators. Interior design are signed by the renowned Nuvolari & Lenard Design.
image description

Yacht name «SILVER WIND - Hybrid» – ISA YACHTS is for sale and located in Genoa, Italy - North Coast, ITALY.

Motor Yacht  «SILVER WIND - Hybrid» built by manufacturer ISA YACHTS in 2014 — available for sale. Yacht location: ITALY. If you are looking to buy a yacht «SILVER WIND - Hybrid» or need additional information on the purchase price of this ISA YACHTS,
please call: +1-954-274-4435 (USA)

Only deal with professionals!

454
new listings
in the past 30 days
$ 9.15 bln
total USD
on the market
12 days
remaining until
Southeast US Boat Show
17
yachts sold
in the past 30 days
$ 73.5 mln
total sales
in the past 30 days