Rejoice - MORRIS YACHTS - Buy and sell boats

Accommodations

The interior is thoughtfully laid out with two cabins for two couples with occasional additional guests and is finished in a Herreshoff style with white laminate bulkheads and satin varnished cherry trim with gloss highlights. The sole teak with a satin finish and the overhead is white laminate with cherry battens. The whole effect is a beautifully crafted, light and open feeling interior. During the construction, the headroom of the boat was increased to 6’ – 4” and berths lengthened to 6’-6”.

Starting forward, a forward cabin features a large v-berth and access to the forepeak through cherry doors. Aft of the forward cabin to starboard is a large head that incorporates a separate shower area. Opposite the head to port is a hanging locker and bureau with drawers and a locker.

Aft of the head is the comfortable U shaped dinette around a beautifully crafted cherry dining table with folding leaves and integrated storage. Opposite the Dinette is a long settee that functions well as a sea berth. At the aft end of the settee is the navigation station which incorporates repeaters for all instruments and access to the boat’s AC and DC electrical panel and controls.

Aft of the dinette and immediately to starboard of the companionway steps is the well laid out and functional U-shaped galley. Opposite the galley to port is the aft cabin, which was modified to increase the amount of cabin space and size of the double berth. From the interior, the cockpit is easily accessed up three comfortable steps that hinge up for access to the engine.

Bulkheads are marine grade Meranti plywood with Antique white high pressure Pionite laminate
Cabin sole is laminated teak and is secured with stainless steel screws set into brass screw cups with lift out panels for quick access to bilges and systems
Cabin sides are sheathed with gloss varnished cherry battens were visible and with cork inside lockers
Stainless steel opening portlights and overhead hatches provide excellent natural ventilation and light
Overhead hatches are trimmed in varnished cherry and incorporate retractable screens and shades
Throughout the boat thoughtful placement of handholds and finger rails provide secure passage through the interior underway
Hanging locker doors are louvered and other locker doors incorporate vents for excellent ventilation
Careful placement of Cantalupi overhead dome lights, bulkhead mounted reading lights and rod lights provide excellent interior lighting
Cushions throughout are upholstered in Pewter Ultrasuede with self piping
Interior is heated by Espar heating system with outlets in forward cabin, main cabin head and aft cabin

Forward Cabin

Large V-berth with removable filler piece with cushion
Full length cherry shelves along above berth port and starboard
Access to chain locker in forepeak through cherry doors in forward bulkhead
Hanging locker aft of berth on port side with shelf above
Additional storage in large drawers and drop fronts below v-berth
Bulkhead mounted reading lights at head of berth port and starboard
110v outlet
CO2 detector
Opening portlights and overhead hatch
12v Hella fan

Head

Trim is oiled teak
Shower area forward in head with adjustable height shower head
Thermostatically controlled shower mixer for constant shower temperature
Double robe hooks mounted in trim above shower for hanging wet foul weather gear, towels, etc.
Abundant storage in locker under seat in shower as well as locker outboard. Additional storage in locker outboard of counter with adjustable shelves and drawer under counter
Corian countertop with undermounted stainless steel oval sink and single lever faucet
Large teak framed beveled glass mirror mounted on aft bulkhead
Corian toothbrush and cup holder mounted to bulkhead
Soap dispenser mounted in counter
110v outlet
Overhead dome light with additional rod light over counter and courtesy light below.
Snake river holding tank level indicator
Excellent ventilation from opening port light and dorade vent with integrated screen and airflow control as well as 12v fan
Vacuflush marine head

Main Salon

U-shaped dinette to starboard with varnished cherry dining table
Cherry table leaves fold open to double size and drawers below hold silverware and bottles
Full length settee to port doubles as sea berth (includes lee cloth)
Storage outboard in lockers above settee and in lockers behind seat backs. Additional storage under aft section of dinette settee.
Bookshelves above settees on both sides of salon between cherry locker doors
Large hanging locker and bureau with shelf and drawers forward of port settee. Storage for v-berth insert and companionway screen in hanging locker
12v fans over dinette and galley
110v outlet in alcove by dinette and bureau forward of port settee

Navigation Station

Cherry opening nav table mounted to bulkhead at aft end of port settee
Instrument box mounted above nav table with shelf above
VHF, Instrument repeater, back up Raymarine E80 chartplotter and fuel water gauges mounted in instrument box
12v and 110v outlets at nav station
Overhead red/white dome light
Dimmable chart light
Custom AC and DC electrical panel with remote battery switches and inverter/ charger controls
Locker for ships manual with charging mount for handheld VHF
Drawers below nav table
Slide out custom teak two part Morris tool box with storage behind door under drawers

Galley

U-shaped galley laid out to maximize storage and functionality both underway and at anchor
Bone Corian countertop with large undermounted double stainless steel sink and cherry fiddles with cleanouts at corners
Stainless steel single lever faucet with pull out sprayer
Seagull filter water filter system with dedicated spigot
Soap dispenser mounted in counter
GE microwave oven in locker behind cherry door
Force 10 three burner propane stove with oven and broiler
Propane alarm and solenoid control with additional “propane on” indicator light over stove
Sea Frost 12v refrigeration system with electronic controls
Excellent storage in lockers above counter behind sliding and hinged cherry doors for dishware, food, spices, etc.
Spice shelf along aft bulkhead over counter
Rod lights over counter and stove provide ample light
Additional storage in dry locker with adjustable shelves forward of stove
Swing out trash can under sink with additional storage and organization

Aft Cabin

The aft cabin was customize to increase the area and size of the double berth
Hanging locker with bureau with drawers and locker. Additional storage in drawer and drop front door under berth
Undermounted sink with folding faucet in bureau shelf
Full length shelf above berth along hull side
Access panels in inboard and aft bulkheads for access to engine and steering systems
Ventilation and natural light from opening portlight and overhead hatch with integrated retractable screen and shade
Bulkhead mounted reading lights on either side of berth with overhead light
12v fan
110v outlet

Hull

The hull is hand laid solid fiberglass construction vinylester resin with a layer of Kevlar in outer laminate for additional impact resistance. The hull is reinforced with four fiberglass, continuous, longitudinal, structural foam stringers and a pattern of fiberglass transverse stringers.

Topsides Awlgripped “Jade Mist Green” with “Snow White” boot stripe, recessed gold leaf cove stripe and red bottom paint
All major bulkheads are marine grade plywood and are glassed into the hull before it is removed from the mold.
Morris “component structure” method includes bonding the complete interior structure to the hull and deck with fiberglass. Additional hull reinforcement and stiffening includes a reinforced fiberglass mast step, bottom transverse floor and engine mount, chainplate gussets and a matrix of plywood bulkheads, bunk faces and shelves all fiberglassed in place.
PVC rub rail painted to match hull with stainless steel chafe strip
Externally fastened lead keel with shoal draft performance design
Carbon fiber balanced spade rudder with carbon fiber rudder post with upper and lower self-aligning bearings

Deck

Reinforced fiberglass, foam core, one-piece construction with a continuous integral bulwark reinforced with unidirectional fibers.. The flange is solid fiberglass where it attaches to the hull. Core is replaced by high-density foam where fasteners are required and solid hard glass in high load areas.
Hardware and deck fitting locations are drilled, tapped, bedded and thru bolted completely through the deck using backing plates and / or washers where appropriate.
Sport Yacht White gelcoat with contrasting tan non-skid
Integrated bulwark with varnished teak cap
Stainless steel stem fitting with two anchor rollers
(2) 12” stainless steel bow cleats, (2) 10” stainless steel midship cleats and (2) 10” stainless steel stern cleats
Custom stainless steel chocks integrated into toe rail
(4) stainless steel deck hatches
(12) stainless steel opening ports with screens
Two flush mounted fiberglass hatches access propane locker and storage at lazarette
(2) varnished teak dorade boxes with stainless steel cowls with custom stainless steel guard
Stainless steel ventilation cowl for chain locker (removable with cover)
Varnished teak handrails and eyebrow on cabintop
Stainless steel bow and stern rails and stanchions with double lifelines and gates port and starboard
Two piece SS folding swim ladder with PVC treads. Mounting brackets are located at both boarding gates.
Stern rail customized to extend forward to gate for additional security going forward
Teak seat along middle rail of stern pulpit
Teak outboard bracket mounted to stern rail
Nova Lift outboard engine hoist mounted to stern rail
SS deck fills with integral folding levers for all fuel, water and holding tanks.
Folding padeyes for jacklines on port and starboard side decks

Cockpit

The cockpit is laid out for comfortable shorthanded sailing with emphasis on ergonomics and safety.
Coaming sides and cabin back are angled for more comfortable seating and full length settees port and starboard provide ample seating and lounging.
Cockpit sole and seats are covered with teak decking and coaming tops are clad with varnished teak
Cockpit seat cushions in Charcoal Gray Sunbrella with Silver piping
Dodger with roll up front window and large side windows on folding stainless steel bows. Aft bow has grab rail on aft side with Elkhide cover. Removable side extensions for dodger for additional protection offshore
Edson Classic pedestal with through shaft wheel brake, single lever control for shift & throttle, SS guard and SS 40” Destroyer dished wheel with elkhide cover
Ritchie 6” Globemaster with SS hood mounted on pedestal.
Custom stainless steel four hole drink holder mounted to helm pedestal
Varnished teak table with two folding leaves mounted with an Edson bracket to the pedestal. A fleece lined canvas storage bag is provided to protect the table when not in use.
Mesh binocular bag mounted on forward side of pedestal guard
Large sail locker to starboard with gasketed fiberglass hatch
(2) helmsman seat lockers – one large and one smaller with gasketed fiberglass hatch
(2) Winch pockets in coaming with stainless steel trim rings
Additional winch holder mounted to helm?
Manual bilge pump in coaming at helm
Primary and secondary winches are located aft in the cockpit within easy reach of the helm and the main sheet is double ended back to the starboard secondary winch for easy single handed sail handling from the wheel.
Mesh bags mounted to rail for line organization by secondary winches
All winches for working lines are electric for easier sail handling
Raymarine e95 chartplotter/radar installed on pedestal guard at helm
Bowthruster control mounted in coaming at helm with additional foot controls in cockpit sole
Autopilot control in coaming at helm
VHF command mic in coaming at helm
Wind, speed and depth instruments mounted above companionway on varnishd teak board
Heel angle indicator under companionway
Folding teak helm step
Folding padeyes for jacklines or tethers mounted in fore and aft ends of cockpit
Sliding companionway dropboards with brass tracks store in storage bag in sail locker
Screen insert for companionway
Sliding companionway hatch cover with translucent gray lexan top.
Hot/cold cockit shower recessed in coaming at helm

Sails and Rigging

Offshore carbon fiber mast with aluminum spreader and Leisurefurl boom. Mast, boom and spreaders painted to match deck
Rigid Forespar boom vang
Discontinuous stainless steel rod rigging
Navtec integral hydraulic backstay adjuster
Mast and deck rigged for future installation of self tacking jib (includes Harken track and car mounted on cabintop forward of the mast)
Adjustable jib sheet lead with control line led back to cockpit
Mast modified and reinforced for future installation of inner forestay
Boom fitted with additional bale for preventer
Main sheet double ended to starboard secondary winch next to helm
(2) Mobri radar reflectors on port and starboard cap shrouds
No-Strike lightning brush at masthead
Harken Big Boat track and car traveller. Car control lines with 4:1 purchase led back to cam cleats mounted at the aft end of the cabin top under the dodger.
Rope clutches for cabintop winches for preventer, boom vang, main sheet, main halyard, main furling line and topping lift
Running rigging includes main halyard, jib halyard, masthead flag halyard, port spreader halyard, jib furling line, vang control line, main sheet (double ended), main furling line, two jib sheets, topping lift, preventer, spinnaker halyard and traveler control lines.
Winch pocket mounted to mast

Sails

North Marathon 3DL full batten Main
North Martathon 3DL 103% Jib
North G-0 Gennaker with hoistable furler system

Winches

(2) Primary Lewmar 54 electric self-tailing stainless steel
(1) Secondary Lewmar 46 electric self-tailing stainless steel (starboard for double ended main sheet)
(1) Secondary Lewmar 40 self-tailing stainless steel (port)
(2) Lewmar 46 electric self-tailing stainless steel winches on cabin top for main halyard and main sheet
(1) Lewmar 7 snubbing winch for main halyard and furling line
(2) Lewmar 40 self-tailing stainless steel winches on mast

Navigational Systems

Raymarine e95 hybrid touch color chartplotter/radar display at helm (2014)
Raymarine E80 backup color chartplotter display at nav station
Raymarine 2kW radome with stainless steel mount on mast
Raymarine Sirius weather module
Raymarine ST7002 S3G Autopilot
Raymarine ST60 instruments with (4) displays. Separate displays for depth, speed and wind will be mounted above the companionway in the seahood. A multi-function Graphic repeater is mounted at the Nav Station. The instruments are interfaced with the GPS, autopilot and radar.
Icom M504 VHF mounted at nav station with full function Command Mic mounted at helm
West Marine VHF250 submersible handheld VHF with charging station at nav station
Wilson Cellular extender

Electrical Systems

Mastervolt custom layout. 12 volt DC and 110-volt AC circuit breakers on one integrated panel, illuminated text labels, System Manager panel for 12 VDC and 110 VAC monitoring, polarity indicator, main breakers, battery switches and cross connect system for emergency starting. System includes a Battery Watch monitor that measures battery state and shuts the system down in the event of low battery level.
Electrical panel frame hinged for excellent access to wiring and fuses behind
(1) Optima AGM starting battery with 800 CCA (2016)
(3) Meridian AGM house batteries with total capacity of 540 amp hours (2016)
Dual Balmar 100 amp alternators for battery charging
Mastervolt Mass Combi 12/2000-100 combination battery charger/inverter
Blue Seas remote battery switches with manual override
30 amp shore power inlet with cord and galvanic isolator
110v AC outlets with GFCI protection
Masthead tricolor, running and steaming light upgraded to LED
Recessed spreader lights in lower spreaders
Bonding system for all tanks, shrouds, engine, keel and mast
Aquasignal stainless steel running light, stern light and foredeck flood light

Mechanical

Yanmar 4JH4-SD60 56-hp diesel with sail drive system mounted on a molded fiberglass bed. Single lever for throttle and shift controls in the pedestal, Teflon lined control cables, fiberglass pot muffler, electric stop and full instrument panel in the cockpit.
NEW Yanmar SD60 saildrive (2016)
Upgraded belts for engine alternators
Water pump has Speedseal cover for easy access to the impeller.
Racor 500 dual fuel filter system with vacuum gauges and water sensors
Seafire FE-241 automatic fire extinguisher system in the engine compartment.
Engine area is lined with 1.5” of Thinsulate sound deadening material combined with a layer of cork dampening material and covered with aluminum perforated sound absorption panels.
3 Blade Flex-O-Fold 18” folding propeller
Sidepower SE80/185T tunnel thruster with foot controls . Controls (foot switches) are mounted at the helm in addition to the standard Sidepower controls mounted on coaming to starboard of wheel
Seafrost DC refrigeration system with evaporator plates and electronic thermostat.
Aluminum fuel tank with a total capacity of 50 gallons. Tank has baffles, clean out port and is vented overboard.
(2) SS fresh water tanks with a total capacity of 128 gallons located mid-ships. Tanks have removable inspection ports
(2) Fiberglass Propane tanks with solenoid switch and selector valve with additional outlet for grill
Seagull X1-F charcoal filter system with a single faucet in the galley
SS 11 gallon hot water heater heated by engine or 110 Volt AC power.
Cruz-Pro digital tank monitors for fresh water and fuel
Vacuflush toilet system
30 gallon aluminum holding tank with external level monitor and overboard vent. Tank can be emptied overboard through a seacock and discharge pump or by deck pump out.
Johnson 2200 electric bilge pump and Ultra Safety Systems float switch.
Shurflow pressure water system
Thermostatic shower mixer for constant shower water temperature
Sump tank with automatic float switch for shower sump and fridge drain
Edson 18 GPM diaphragm manual bilge pump flush-mounted in the cockpit.
Scandvik flush mount hot and cold deck shower mounted in cockpit
Shurflo Blaster 5.0 GPM wash down pump with connections at bow.
Forespar Marelon type reinforced plastic seacocks. Thru-hulls above the waterline are fiberglass tube.
Espar D5LCC diesel heater with vents in the head, forward cabin, main cabin and aft cabin
CO2 monitor mounted in forward cabin

Additional Equipment

Avon soft bottom inflatable dinghy with canvas storage bag
Honda 2.3 hp four stroke outboard (2014)
(4) fenders with polar fleece covers and lines
Docklines
Electric Lewmar V2 SS vertical capstan windlass
Rocna primary anchor
Fortress secondary anchor with anchor rode
Yanmar spare parts kit
Winslow 60ULO offshore 6 person life raft
Varnished spruce fenderboards
Emergency rig removal kit
Tool kit
Stern rail mounted propane grill (with propane feed from ships propane tanks)
Custom Morris owner’s manual in addition to manufacturer’s equipment manual
(3) Kiddie Mariner 10 dry chemical fire extinguishers
Wooden plugs attached to all thruhull fittings
Jacklines for port and starboard side decks
First aid kit

Owner’s personal effects excluded from sale

Thank you!

We have received your message and will get back to you shortly.

Contact us

We will call you back.

Thank you!

We have received your message and will get back to you shortly.

Consultation

Answering your questions

Thank you!

We have received your message and will get back to you shortly.

Consultation

Answering your questions

Industry leader in

Thank you!

We have received your message and will get back to you shortly.

MORRIS YACHTS

Rejoice - MORRIS YACHTS

Specifications

Basic Information

Dimensions

Speed, Capacities and Weight

Accommodations

Hull and Deck Information

Engine Information

Overview

Overview

Learn more on the “Search results”