• Hand-laid, gel-coated fiberglass hull
• Frameless windows 
• Airex® C70.90 foam on hull sides (closed cell, cross-linked polymer foam w/ highest elongation in its class for great impact strength. Sound and temperature insolation w/ self extinguishing properties) 
• Tempered, dark-tinted window glass 
• Carbon reinforced structural fiberglass stringers filled with high density foam
• Vinylester resin 
• Locker at port side wing in cockpit 
• Solid fiberglass hull bottom All fixed windows 
• Starboard boarding gate in cockpit
• Screens on all port lights, screen/ shade for hatch 
• Swimming ladder
• Deck lights, 24V 
• White non-skid fiberglass decks Ventilation hatch fwd. master stateroom top 
• Engine room access through lazarette 
• Water tight doors in PH 
• Chain locker in fwd. peak with hinged hatch on fwd. deck 
• Hard top w/ ventilation hatches 
• Teak swim platform FRP transom doors 
• White vinyl rub rail, S/S insert 
• Fiberglass bow pulpit with S/S anchor roller 
• Lexan windshield on FB 
• Epoxy based antifouling/ anti- osmosis system 
• Gates in elliptical S/S handrail port & stbd. 
• U-Shape seating on FB
• Wet bar with sink and bar refrigerator on FB 
• Enlarged 28” cockpit hatch to lazarette 
• Reinforced collision bulkhead 
• Two coats of Seahawk or equal primer, an epoxy barrier coat and covered with two coats of Seahawk equal anti-fouling bottom paint

• S/S hardware
• S/S rudders 
• 2” elliptical S/S handrails & stanchions main deck, 1-1/2” rail on FB 
• Bronze struts w/ cutlass bearing 
• Custom propeller shafts 
• S/S cleats & hawse holes 
• Bronze through-hull fittings 
• Windlass, Maxwell Vertical (Electric))
• Zincs on rudders, shafts & trim tabs 
• S/S handrails on transom 
• Afromosia® steering wheel inside & S/S on FB 
• Trim tabs
• Keypower Hydraulic Adaptive Stabilizers
• Teak bow and stern staffs 
• Fresh-water/Saltwater wash down, fwd. deck 
• Oversized windshield wipers & washers 
• Fresh-water wash down, cockpit
• S/S sliding door, cockpit to salon 
• Remote operated lockable cockpit hatch 
• Aft deck shower, dock side water (one unit) 
• New style windows and S/S oval port lights Scuppers, side cockpit 
• High-performance, computer-designed and machined class “S” propellers 
• Water-tight door lazarette to engine room 
• Teak cockpit coaming (Varnished)
• S/S swivel anchor light bracket 
• Heavy-duty corner cleats at both sides of Euro transom 
• Sunbrella® fabric (Berenson Tuxedo #8521) on outside cushions 
• Lighted OA logo

• Two control stations: FB & PH, complete engine
• Instrumentation with lighted modern switches 
• Third control in cockpit (engine and thruster) 
• Hydraulic steering system 
• Engine alarm system, audio oil pressure and water temperature 
• Unwater Exhaust and including water temperature, oil pressure, hour meter and start/ stop controls in engine room and remote start/ stop controls in the pilot house. 
• Kahlenberg® trumpet air horn 
• Glendinning Electronic engine control with complete back-up controls
• International navigation lights 
• Engine hour meter

• Heavy-duty battetries (8 x 6Volt and 6 x 8D)
• Engine battery disconnect switch 
• Battery paralleling system with control switch 
• Service battery switch 
• 4000W inverter/ charger (pure sine wave) 
• GFI reset in the main electrical panel 
• Digital Volt & Amp meters 
• Marine grade tinned copper wiring 
• Bonding system w/ AC outlets throughout 
• Electric panel w/ back lighting 
• Polarity reverse indicator light 
• Shore power receptacle 1 x 50AMP •
•  Vimar® light switches and outlets 
• Phone jacks at MSR & salon & PH • TV inlets in salon and each stateroom 
• 24V lights in all compartments 
• Shore power cords, wired directly into GFI protected shoreline breakers 
• Dimmers for MSR sconces 
• AC/ DC distribution panel with magnetic circuit breakers

• Headhunter® pressure fresh water system

• Sea cocks and raw water strainers on all intakes
• Engine room 2” lead/ foam Quadzero sound insulation 
• 30 gallon water heater 
• Racor® fuel/ water separators 
• Aluminum fuel tanks with sight gauges 
• Engine room vent blowers, 2 x 24V 
• S/S water tanks w/ sight gauges 
• Engine isolation switches 
• Holding tank plumbed dockside for overboard discharge 
• Common drainage system for sink, shower, bilge & exterior deck 
• Heron® rubber flooring in engine room 
• 110V fluorescent lights or wiring only for 220V/50HZ system 
• AC outlets throughout
• Fresh water outlet with hose for engines & generator 
• 24V /110V ceiling lights, anti-explosion type in engine room 
• Color coded piping for fuel, water and hydraulic systems 
• One manual bilge pump 
• High water bilge alarm x 5 
• Lighted bilge 
• Holding tank gauge in PH w/ air filter for holding tank 
• S/S safety rail on inboard side of engines 
• Two S/S reinforcement brackets on engine room ceiling 
• Cruisair® central air conditioner w/ECU control panel, 16K (five sets) with drain sump pump (Reverse Cycle capable for operating down to 40 degrees F) 
• The vessel’s bonding and grounding systems shall include copper straps secured to the hull and running the full length of the vessel parallel to centerline. Engines, generators, metallic through hulls, strainers, and pump bodies shall be connected to the bonding strap using 8 AWG wire minimum or equivalent 
• Generators exhausts are water-drop type per “Centek”, “Marine Exhaust Co.” 
• Generator set resiliently mounted and installed with sound shield 
• Four electric bilge pumps, 24V auto & manual switch
• S/S cap on transverse stringers in central walkway 
• Underwater exhaust system 
• Removable Deco panels on sides of engine room 
• Both side fillers for fuel tanks 
• Sylomer floating floor system 
• Spare conduit running from engine room to PH, engine room to FB and engine room to FB hard top 
• Dripless engine shaft seal logs and rudder posts 
• S/S engine beds 
• Two 24V shower sump pumps

• Afromosia® paneling and cabinetry
• Satin varnish for interior finish
• European door handle or equal Push-button handles for drawers & cupboards
•  Stainless Steel hardware
• Removable headliner on entire boat
• Cabin entrance door with designable circular arc shape on top
• Hanging lockers with dual locking mechanism
• Flip-up berth for storage
• Cornice box and all interior window frames with rounded corners
• Painted flooring prepared for carpet, except for teak and holly in PH, galley and heads (all Ocean Alexander flooring is 5/16” thick w/ over 4x sandings for ease of repair maintenance and longevity)
• Seagull water purifier (ADEX design award winner w/ filtration to 0.1 microns & EPA certification for microbiological purification)
• Phantom® screens for after salon & pilot house doors
• 2” bull-nose cabinet tops

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All personal property is excluded unless specifically identified and included in the sale agreement and listing specifications. Personal property refers to all items not permanently attached to the vessel including but not limited to: artwork,furnishings, and recreational or entertainment items. Advertisements, marketing materials, and or other photography may depict the vessel with personal property, however, such personal property is excluded unless otherwise specifically included as provided herein.