Cruise Air marine a/c (46k BTU) 3 zone (2)16K BTU, (1) 10K BTU

12v lights

110v outlets

115v AC elec system

12v DC elec system

Electrical bonding system

Onan 8kw generator in soundshield w/117 hours

LED lighting through out

New battery charger 2014

Galvanic isolator 2014

Battery condition gauge

(2) 8D Marine Batteries (NEW 2012)

(1) 4D Marine Battery (NEW 2012)

30 amp 50' dockside elec cables

Newmar breaker panel

"All new in 2013"

GPSMAP8212 MFD chart plotter - upper helm

GRID remote input device for 8212

GPSMAP8208 MFD chart plotter - lower helm

GSD24 sonar module

GHP20 auto pilot with SmartPump

GMR404xHD radar

IC-M504 VHF marine transceiver - upper helm

HM162 remote control microphone - lower helm

Visio Smart TV

Bottom peeled, barrier coat and 2 coats of bottom paint (2013)

Replaced sea cocks on both engines and gen set thru hulls

Port & starboard-side bording gates in rails and transom boarding

Non-skid aft, side, fore & upper decks - white with waterway and drainage gutters

Custom welded continuous stainless steel handrail around the main deck w/lower lifeline.

Mooring chocks & cleats port & starboard - (4) each side

Molded stairwell from aft deck to upper deck with non-skid treads

Trim Tabs

Molded cabinet fresh water basin & ice maker

Hot & cold fresh water shower attachment at transom

AB Lammina 9.5AL with locker aluminium bottom dinghy, new 2014

Weaver flip up dinghy mount

Folding swim ladder

Stainless side stanchions

Fiberglass side skirt

3' wide FRP swim platform

AC & DC elecrical outlets 110V/220V (waterproof w/GFI)

Hardtop w/stainless steel supports

Full isinglass enclosure (2013)

Magma Propane BBQ w/Custom Mount

Dock Pressure Water Fill

Port & starboard boarding gates

Fiberglass radar arch

Coast Guard Safety Package

Vetus Alex III anchor windlass 12VDC, dual direction, (2) station control, overload protection

45 lb Manson Supreme anchor new 2014

Opening hatch to forward state room

Helm console on centerline with full engine instrumentation

Morse engine controls

Hynautic Dual Steering System Pump with 30" diameter Destroyer Type ss wheel

Molded FRP Arch with internal PVC wire conduit and lighting

Stainless steel railings

Flybridge tinted windscreen

Sunbrella Navy bimini top with isinglass enclosure (new 2013)

Molded seating with stowage

Custom cushions

Helm Cover

110V and 12V Electrical Plugs

Halon Fire Buoy System

Twin Cummins 6BT5.9-M diesel engines, rated 220 BHP. 

Fuel consumption approximately 3.5 gal/hr at 1400 rpm

New Exhaust Risers 2008

Hurth Twin Disc Marine reverse/reduction gear, 2.5:1 ratio

Aquamet 22 propeller shafts – 2 ¼” diameter

3 blade bronze propellers, true pitch and balanced 2014

PSS dripless stuffing box and cutlass bearings replaced 2014, both engines

Both engines aligned, 2014

Reverso oil change system with 3 ports (2014)

Engine temperature alarms

Bilge blowers

High water alarm in engine room bilge

Engine hour meters

Engine room sound insulation

Racor fuel filters

Racor T-handle change filter indicators

Muffled wet exhaust system with transom exit

Morse cable engine control system

Bronze sea-cocks and basket filter sea strainers on all intake thru hulls

Oil pressure alarms

Rudder/Syncroniser indicator

Fresh water cooling systems (main engines & generator)

Raw water sea strainer

2 steel fuel tanks in engine room (250 gallons each)

200 US gallon stainless steel fresh water tank under fwd berth

Stainless steel fresh water tank under galley sole (50 US gallon)

Raritan Electro Scan  waste treatment system, 2013

Clean-outs and shut-off valves at all tanks

Sight Gauges on Fuel Tanks

Stainless steel fuel supply and return manifolds

Dual Racor 900 max fuel filters

Racor 500R fuel filter for generator

Rule 12VDC automatic bilge pumps

Full pressure water system for fresh water – 12VDC pressure pump with accumulator tank

11 gallon Seaward stainless steel water heater

Whale System color-coded piping Individual self-contained 12VDC shower & air conditioning condensation sumps

Auto/manual electric bilge pumps

Plumbed for watermaker

Hand laminated fiberglass reinforced plastic hull, solid laminate bottom, topsides, outer laminates vinylester, inner laminates polyester

Hand laminated decks & house - Balsa Cored

Hull to deck mechanically fastened and secondary bonded

Overlapping (doubled) laminations at chine & keel

Solid laminate backing plates at hardware attachments

Stitch-Mat fiberglass fabrics - 0/90 and +/45 per laminates schedules - hull, decks, superstructures

Balsa Core main structural bulkheads with stress-relief pads at hull and high-strength bonding laminates

(4) full length cored FRP Longitudinal girders in the hull bottom with local transverse floors

Molded upper & lower hull guard rails with solid 1 1/4" stainless steel oval rubbing strips

Full-length molded rub rail with 1 1/4: stainless steel oval rub strips at sheerlin